Showing 251–300 of 800 results
-
Advanced Dual Range NCV 12-1000V & 100-1000V AC
Read more40150N
Features
- High power rear flashlight
- Thinner probe tip for working with wall outlets
- Power switch now standard
- Green LED means power on, flashing red LED with beeper means voltage detected
- Low battery self test
- Two modes, green means high voltage mode, yellow means low voltage mode
- Silent Mode
- Forward facing flashlight
- IP67 waterproof
- Pocket clip for easy storage
- Flash and Beep rate increase as the detector gets closer to the voltage source helping the user pinpoint live circuits
- Not designed for use with Tamper Resistant™ Outlets
-
Analog Timer Electromechanical 60 – 480 min SPST – 1 NO Gray/Metallic Gloss
Read moreManufacturer:INTERMATIC
Manufacturer #:t101 -
Annular Cutter Set – 6PC
Read more(49-22-8400)
Dual alternating tooth geometry and thin-wall construction help Milwaukee’s durable 6-Piece Annular Cutter Set cut up to 15% faster than the competition. With 20% thinner walls, these cutters displace less material for the same size hole, giving you fast, burr-free holes in anything from sheet metal to thick steel plate. Milwaukee’s proprietary high-speed steel with three hardness zones minimizes breakage and helps the bits last longer. Each cutter comes with a 3/4” Weldon shank, which is ideal for use with most small magnetic drill presses and large magnetic drill presses with the correct arbor. The kit includes 9/16″, 5/8″, 11/16″, 13/16″, 15/16″ and 1-1/16″ cutters, a 1″ pilot bit (centering pin) and a sturdy carrying case.
INCLUDES:
(1) 9/16″ Annular Cutter
(1) 5/8″ Annular Cutter
(1) 11/16″ Annular Cutter
(1) 13/16″ Annular Cutter
(1) 15/16″ Annular Cutter
(1) 1-1/16″ TCT Annular Cutter
(1) 1 1/16″ Annular Cutter
(1) Ejector Pin
(1) Retractable Pilot Pins -
ARLINGTON BE1 Rectangular Box Extender 1 Gangs 1.813 in D White
Read moreManufacturer:ARLINGTON
Manufacturer #:be1 -
Astro Digital 1CH 30A 120-277V SPDT
Read morePart #EWZ120
Astronomic 7-Day Digital Time Switch One Channel 30A 120-277V SPDT Indoor/Outdoor Plastic Enclosure
Product Information
Brand Name: NSi
Scheduling: 7 Day
Type: 7 Day Astronomic Time Switch – 1 Or 2 Channel
Number of Channels: 1
ON/OFF Set Points: 20
Astronomic: Yes
Holiday Schedules: No
Voltage Rating: 120/277 VAC
Enclosure: NEMA 3R Plastic Indoor-Outdoor With Locking Hasp
Action: SPDT
Frequency Rating: 50-60 Hz
Mounting: Screw Mount
Operating Temperature: -40 to + 149 F
Application: Outdoor Signs-Lighting Security-HVAC Control
Standard: cULus -
Auto-Ranging Digital Multimeter, 600V AC/DC
Read more10041N
The Southwire 10041N multimeter provides all the features & functions you’ll ever need in an affordable multimeter. Features include a rugged double-molded housing, CAT III 600V safety rating, and a built-in non-contact AC voltage tester. Meets the latest UL safety standards.
Features
- Measures AC/DC voltage up to 600V, Resistance up to 2MΩ, and AC and DC current up to 10A
- CAT III 600V Safety Rating
- Measures capacitance, frequency, temperature and duty cycle. Tests batteries, continuity, and diodes.
- Built-In Non-Contact AC Voltage Detector
- Convenience features include built-in test probe holder, kickstand, easy-change fuses, and accepts Southwire magnetic hanging strap (available separately)
- Built to withstand a 6-foot drop
- New design meets the latest UL safety standard
- Includes test leads, thermocouple with adapter, and 9V battery
- Backlit LCD Display
- Auto Power Off preserves battery life
Includes
- 10041N CAT III Multimeter
- Test leads
- Type K temperature probe with banana plug adapter
- 9V battery
- Instruction manual
-
Band Saw Blades 48-39-0572
Read moreMake precision cuts with Milwaukee’s portable band saw blades. Cut a variety of metal including strut, conduit, angle iron, copper, threaded rod and pipe. The aggressive tooth form ensure’s fast and clean cuts in medium and thin metals. Available in deep cut (44 7/8″), compact (32 7/8″ & 35 3/8″) and sub-compact (27″) sizes.
-
Baseboard Heater PEG0300
Read moreFeatures
Color
– Standard: white, almond.
– Optional (upcharge applicable): metallic silver, bronze, metallic charcoal, aluminum, semi-gloss black, sand.
– Custom colors available upon request.Finish
– Standard: epoxy/polyester powder paint.
– May be repainted with any interior paint.Voltage
– 120V, 208V, 240/208V, 277V, 347V, 480V, 600V, 1-phase.Construction
– Robust 22-gauge steel body.
– Sturdy 20-gauge steel front panel.
– Welded 20-gauge steel connection box.
– Rounded corners.
– Linear high-limit temperature control with automatic reset.Heating element
– Stainless steel tubular heating element with aluminum fins.
– Floating heating element on high-temperature nylon bushings reducing expansion noises.Watt density
– Average standard watt density of 275W/ft. (900W/m).
– Average low watt density of 200W/ft. (659W/m).Control
– A wide selection of built-in controls available.
– Built-in thermostat kit can be installed at either end.
– Built-in relay kit fits in the right end box only.
– A compartment for low voltage connections (located directly under the junction box) facilitates the installation of low voltage relay in electric baseboard.Global Commander highly recommends using an electronic wall thermostat
for greater comfort and efficiency.Installation
– Installation directly on the floor.
– No need to disassemble for electrical connection or wall attachment.
– Built-in single-screw wire holder on the back for quick connection box access from either end.
– Two rows of oval mounting holes with centering mark for ease of installation.
– Raceway and side knock-outs for baseboard interconnection.Warranty
– 5-year warranty against defects.
– Heating element has a lifetime warranty for the initial end user.Application
– Kitchen, living room, family room, bedroom, bay window, commercial building, office building, condo, restaurant. -
Baseboard Heater PEG0302
Read moreFeatures
Color
– Standard: white, almond.
– Optional (upcharge applicable): metallic silver, bronze, metallic charcoal, aluminum, semi-gloss black, sand.
– Custom colors available upon request.Finish
– Standard: epoxy/polyester powder paint.
– May be repainted with any interior paint.Voltage
– 120V, 208V, 240/208V, 277V, 347V, 480V, 600V, 1-phase.Construction
– Robust 22-gauge steel body.
– Sturdy 20-gauge steel front panel.
– Welded 20-gauge steel connection box.
– Rounded corners.
– Linear high-limit temperature control with automatic reset.Heating element
– Stainless steel tubular heating element with aluminum fins.
– Floating heating element on high-temperature nylon bushings reducing expansion noises.Watt density
– Average standard watt density of 275W/ft. (900W/m).
– Average low watt density of 200W/ft. (659W/m).Control
– A wide selection of built-in controls available.
– Built-in thermostat kit can be installed at either end.
– Built-in relay kit fits in the right end box only.
– A compartment for low voltage connections (located directly under the junction box) facilitates the installation of low voltage relay in electric baseboard.Global Commander highly recommends using an electronic wall thermostat
for greater comfort and efficiency.Installation
– Installation directly on the floor.
– No need to disassemble for electrical connection or wall attachment.
– Built-in single-screw wire holder on the back for quick connection box access from either end.
– Two rows of oval mounting holes with centering mark for ease of installation.
– Raceway and side knock-outs for baseboard interconnection.Warranty
– 5-year warranty against defects.
– Heating element has a lifetime warranty for the initial end user.Application
– Kitchen, living room, family room, bedroom, bay window, commercial building, office building, condo, restaurant. -
Baseboard Heater PEG0500
Read moreFeatures
Color
– Standard: white, almond.
– Optional (upcharge applicable): metallic silver, bronze, metallic charcoal, aluminum, semi-gloss black, sand.
– Custom colors available upon request.Finish
– Standard: epoxy/polyester powder paint.
– May be repainted with any interior paint.Voltage
– 120V, 208V, 240/208V, 277V, 347V, 480V, 600V, 1-phase.Construction
– Robust 22-gauge steel body.
– Sturdy 20-gauge steel front panel.
– Welded 20-gauge steel connection box.
– Rounded corners.
– Linear high-limit temperature control with automatic reset.Heating element
– Stainless steel tubular heating element with aluminum fins.
– Floating heating element on high-temperature nylon bushings reducing expansion noises.Watt density
– Average standard watt density of 275W/ft. (900W/m).
– Average low watt density of 200W/ft. (659W/m).Control
– A wide selection of built-in controls available.
– Built-in thermostat kit can be installed at either end.
– Built-in relay kit fits in the right end box only.
– A compartment for low voltage connections (located directly under the junction box) facilitates the installation of low voltage relay in electric baseboard.Global Commander highly recommends using an electronic wall thermostat
for greater comfort and efficiency.Installation
– Installation directly on the floor.
– No need to disassemble for electrical connection or wall attachment.
– Built-in single-screw wire holder on the back for quick connection box access from either end.
– Two rows of oval mounting holes with centering mark for ease of installation.
– Raceway and side knock-outs for baseboard interconnection.Warranty
– 5-year warranty against defects.
– Heating element has a lifetime warranty for the initial end user.Application
– Kitchen, living room, family room, bedroom, bay window, commercial building, office building, condo, restaurant. -
Baseboard Heater PEG0502
Read moreFeatures
Color
– Standard: white, almond.
– Optional (upcharge applicable): metallic silver, bronze, metallic charcoal, aluminum, semi-gloss black, sand.
– Custom colors available upon request.Finish
– Standard: epoxy/polyester powder paint.
– May be repainted with any interior paint.Voltage
– 120V, 208V, 240/208V, 277V, 347V, 480V, 600V, 1-phase.Construction
– Robust 22-gauge steel body.
– Sturdy 20-gauge steel front panel.
– Welded 20-gauge steel connection box.
– Rounded corners.
– Linear high-limit temperature control with automatic reset.Heating element
– Stainless steel tubular heating element with aluminum fins.
– Floating heating element on high-temperature nylon bushings reducing expansion noises.Watt density
– Average standard watt density of 275W/ft. (900W/m).
– Average low watt density of 200W/ft. (659W/m).Control
– A wide selection of built-in controls available.
– Built-in thermostat kit can be installed at either end.
– Built-in relay kit fits in the right end box only.
– A compartment for low voltage connections (located directly under the junction box) facilitates the installation of low voltage relay in electric baseboard.Global Commander highly recommends using an electronic wall thermostat
for greater comfort and efficiency.Installation
– Installation directly on the floor.
– No need to disassemble for electrical connection or wall attachment.
– Built-in single-screw wire holder on the back for quick connection box access from either end.
– Two rows of oval mounting holes with centering mark for ease of installation.
– Raceway and side knock-outs for baseboard interconnection.Warranty
– 5-year warranty against defects.
– Heating element has a lifetime warranty for the initial end user.Application
– Kitchen, living room, family room, bedroom, bay window, commercial building, office building, condo, restaurant. -
Baseboard Heater PEG0507
Read moreFeatures
Color
– Standard: white, almond.
– Optional (upcharge applicable): metallic silver, bronze, metallic charcoal, aluminum, semi-gloss black, sand.
– Custom colors available upon request.Finish
– Standard: epoxy/polyester powder paint.
– May be repainted with any interior paint.Voltage
– 120V, 208V, 240/208V, 277V, 347V, 480V, 600V, 1-phase.Construction
– Robust 22-gauge steel body.
– Sturdy 20-gauge steel front panel.
– Welded 20-gauge steel connection box.
– Rounded corners.
– Linear high-limit temperature control with automatic reset.Heating element
– Stainless steel tubular heating element with aluminum fins.
– Floating heating element on high-temperature nylon bushings reducing expansion noises.Watt density
– Average standard watt density of 275W/ft. (900W/m).
– Average low watt density of 200W/ft. (659W/m).Control
– A wide selection of built-in controls available.
– Built-in thermostat kit can be installed at either end.
– Built-in relay kit fits in the right end box only.
– A compartment for low voltage connections (located directly under the junction box) facilitates the installation of low voltage relay in electric baseboard.Global Commander highly recommends using an electronic wall thermostat
for greater comfort and efficiency.Installation
– Installation directly on the floor.
– No need to disassemble for electrical connection or wall attachment.
– Built-in single-screw wire holder on the back for quick connection box access from either end.
– Two rows of oval mounting holes with centering mark for ease of installation.
– Raceway and side knock-outs for baseboard interconnection.Warranty
– 5-year warranty against defects.
– Heating element has a lifetime warranty for the initial end user.Application
– Kitchen, living room, family room, bedroom, bay window, commercial building, office building, condo, restaurant. -
Baseboard Heater PEG0750
Read moreFeatures
Color
– Standard: white, almond.
– Optional (upcharge applicable): metallic silver, bronze, metallic charcoal, aluminum, semi-gloss black, sand.
– Custom colors available upon request.Finish
– Standard: epoxy/polyester powder paint.
– May be repainted with any interior paint.Voltage
– 120V, 208V, 240/208V, 277V, 347V, 480V, 600V, 1-phase.Construction
– Robust 22-gauge steel body.
– Sturdy 20-gauge steel front panel.
– Welded 20-gauge steel connection box.
– Rounded corners.
– Linear high-limit temperature control with automatic reset.Heating element
– Stainless steel tubular heating element with aluminum fins.
– Floating heating element on high-temperature nylon bushings reducing expansion noises.Watt density
– Average standard watt density of 275W/ft. (900W/m).
– Average low watt density of 200W/ft. (659W/m).Control
– A wide selection of built-in controls available.
– Built-in thermostat kit can be installed at either end.
– Built-in relay kit fits in the right end box only.
– A compartment for low voltage connections (located directly under the junction box) facilitates the installation of low voltage relay in electric baseboard.Global Commander highly recommends using an electronic wall thermostat
for greater comfort and efficiency.Installation
– Installation directly on the floor.
– No need to disassemble for electrical connection or wall attachment.
– Built-in single-screw wire holder on the back for quick connection box access from either end.
– Two rows of oval mounting holes with centering mark for ease of installation.
– Raceway and side knock-outs for baseboard interconnection.Warranty
– 5-year warranty against defects.
– Heating element has a lifetime warranty for the initial end user.Application
– Kitchen, living room, family room, bedroom, bay window, commercial building, office building, condo, restaurant. -
Baseboard Heater PEG0752
Read moreFeatures
Color
– Standard: white, almond.
– Optional (upcharge applicable): metallic silver, bronze, metallic charcoal, aluminum, semi-gloss black, sand.
– Custom colors available upon request.Finish
– Standard: epoxy/polyester powder paint.
– May be repainted with any interior paint.Voltage
– 120V, 208V, 240/208V, 277V, 347V, 480V, 600V, 1-phase.Construction
– Robust 22-gauge steel body.
– Sturdy 20-gauge steel front panel.
– Welded 20-gauge steel connection box.
– Rounded corners.
– Linear high-limit temperature control with automatic reset.Heating element
– Stainless steel tubular heating element with aluminum fins.
– Floating heating element on high-temperature nylon bushings reducing expansion noises.Watt density
– Average standard watt density of 275W/ft. (900W/m).
– Average low watt density of 200W/ft. (659W/m).Control
– A wide selection of built-in controls available.
– Built-in thermostat kit can be installed at either end.
– Built-in relay kit fits in the right end box only.
– A compartment for low voltage connections (located directly under the junction box) facilitates the installation of low voltage relay in electric baseboard.Global Commander highly recommends using an electronic wall thermostat
for greater comfort and efficiency.Installation
– Installation directly on the floor.
– No need to disassemble for electrical connection or wall attachment.
– Built-in single-screw wire holder on the back for quick connection box access from either end.
– Two rows of oval mounting holes with centering mark for ease of installation.
– Raceway and side knock-outs for baseboard interconnection.Warranty
– 5-year warranty against defects.
– Heating element has a lifetime warranty for the initial end user.Application
– Kitchen, living room, family room, bedroom, bay window, commercial building, office building, condo, restaurant. -
Baseboard Heater PEG0757
Read moreFeatures
Color
– Standard: white, almond.
– Optional (upcharge applicable): metallic silver, bronze, metallic charcoal, aluminum, semi-gloss black, sand.
– Custom colors available upon request.Finish
– Standard: epoxy/polyester powder paint.
– May be repainted with any interior paint.Voltage
– 120V, 208V, 240/208V, 277V, 347V, 480V, 600V, 1-phase.Construction
– Robust 22-gauge steel body.
– Sturdy 20-gauge steel front panel.
– Welded 20-gauge steel connection box.
– Rounded corners.
– Linear high-limit temperature control with automatic reset.Heating element
– Stainless steel tubular heating element with aluminum fins.
– Floating heating element on high-temperature nylon bushings reducing expansion noises.Watt density
– Average standard watt density of 275W/ft. (900W/m).
– Average low watt density of 200W/ft. (659W/m).Control
– A wide selection of built-in controls available.
– Built-in thermostat kit can be installed at either end.
– Built-in relay kit fits in the right end box only.
– A compartment for low voltage connections (located directly under the junction box) facilitates the installation of low voltage relay in electric baseboard.Global Commander highly recommends using an electronic wall thermostat
for greater comfort and efficiency.Installation
– Installation directly on the floor.
– No need to disassemble for electrical connection or wall attachment.
– Built-in single-screw wire holder on the back for quick connection box access from either end.
– Two rows of oval mounting holes with centering mark for ease of installation.
– Raceway and side knock-outs for baseboard interconnection.Warranty
– 5-year warranty against defects.
– Heating element has a lifetime warranty for the initial end user.Application
– Kitchen, living room, family room, bedroom, bay window, commercial building, office building, condo, restaurant. -
Baseboard Heater PEG1000
Read moreFeatures
Color
– Standard: white, almond.
– Optional (upcharge applicable): metallic silver, bronze, metallic charcoal, aluminum, semi-gloss black, sand.
– Custom colors available upon request.Finish
– Standard: epoxy/polyester powder paint.
– May be repainted with any interior paint.Voltage
– 120V, 208V, 240/208V, 277V, 347V, 480V, 600V, 1-phase.Construction
– Robust 22-gauge steel body.
– Sturdy 20-gauge steel front panel.
– Welded 20-gauge steel connection box.
– Rounded corners.
– Linear high-limit temperature control with automatic reset.Heating element
– Stainless steel tubular heating element with aluminum fins.
– Floating heating element on high-temperature nylon bushings reducing expansion noises.Watt density
– Average standard watt density of 275W/ft. (900W/m).
– Average low watt density of 200W/ft. (659W/m).Control
– A wide selection of built-in controls available.
– Built-in thermostat kit can be installed at either end.
– Built-in relay kit fits in the right end box only.
– A compartment for low voltage connections (located directly under the junction box) facilitates the installation of low voltage relay in electric baseboard.Global Commander highly recommends using an electronic wall thermostat
for greater comfort and efficiency.Installation
– Installation directly on the floor.
– No need to disassemble for electrical connection or wall attachment.
– Built-in single-screw wire holder on the back for quick connection box access from either end.
– Two rows of oval mounting holes with centering mark for ease of installation.
– Raceway and side knock-outs for baseboard interconnection.Warranty
– 5-year warranty against defects.
– Heating element has a lifetime warranty for the initial end user.Application
– Kitchen, living room, family room, bedroom, bay window, commercial building, office building, condo, restaurant. -
Baseboard Heater PEG1002
Read moreFeatures
Color
– Standard: white, almond.
– Optional (upcharge applicable): metallic silver, bronze, metallic charcoal, aluminum, semi-gloss black, sand.
– Custom colors available upon request.Finish
– Standard: epoxy/polyester powder paint.
– May be repainted with any interior paint.Voltage
– 120V, 208V, 240/208V, 277V, 347V, 480V, 600V, 1-phase.Construction
– Robust 22-gauge steel body.
– Sturdy 20-gauge steel front panel.
– Welded 20-gauge steel connection box.
– Rounded corners.
– Linear high-limit temperature control with automatic reset.Heating element
– Stainless steel tubular heating element with aluminum fins.
– Floating heating element on high-temperature nylon bushings reducing expansion noises.Watt density
– Average standard watt density of 275W/ft. (900W/m).
– Average low watt density of 200W/ft. (659W/m).Control
– A wide selection of built-in controls available.
– Built-in thermostat kit can be installed at either end.
– Built-in relay kit fits in the right end box only.
– A compartment for low voltage connections (located directly under the junction box) facilitates the installation of low voltage relay in electric baseboard.Global Commander highly recommends using an electronic wall thermostat
for greater comfort and efficiency.Installation
– Installation directly on the floor.
– No need to disassemble for electrical connection or wall attachment.
– Built-in single-screw wire holder on the back for quick connection box access from either end.
– Two rows of oval mounting holes with centering mark for ease of installation.
– Raceway and side knock-outs for baseboard interconnection.Warranty
– 5-year warranty against defects.
– Heating element has a lifetime warranty for the initial end user.Application
– Kitchen, living room, family room, bedroom, bay window, commercial building, office building, condo, restaurant. -
Baseboard Heater PEG1007
Read moreFeatures
Color
– Standard: white, almond.
– Optional (upcharge applicable): metallic silver, bronze, metallic charcoal, aluminum, semi-gloss black, sand.
– Custom colors available upon request.Finish
– Standard: epoxy/polyester powder paint.
– May be repainted with any interior paint.Voltage
– 120V, 208V, 240/208V, 277V, 347V, 480V, 600V, 1-phase.Construction
– Robust 22-gauge steel body.
– Sturdy 20-gauge steel front panel.
– Welded 20-gauge steel connection box.
– Rounded corners.
– Linear high-limit temperature control with automatic reset.Heating element
– Stainless steel tubular heating element with aluminum fins.
– Floating heating element on high-temperature nylon bushings reducing expansion noises.Watt density
– Average standard watt density of 275W/ft. (900W/m).
– Average low watt density of 200W/ft. (659W/m).Control
– A wide selection of built-in controls available.
– Built-in thermostat kit can be installed at either end.
– Built-in relay kit fits in the right end box only.
– A compartment for low voltage connections (located directly under the junction box) facilitates the installation of low voltage relay in electric baseboard.Global Commander highly recommends using an electronic wall thermostat
for greater comfort and efficiency.Installation
– Installation directly on the floor.
– No need to disassemble for electrical connection or wall attachment.
– Built-in single-screw wire holder on the back for quick connection box access from either end.
– Two rows of oval mounting holes with centering mark for ease of installation.
– Raceway and side knock-outs for baseboard interconnection.Warranty
– 5-year warranty against defects.
– Heating element has a lifetime warranty for the initial end user.Application
– Kitchen, living room, family room, bedroom, bay window, commercial building, office building, condo, restaurant. -
Baseboard Heater PEG2007
Read moreFeatures
Color
– Standard: white, almond.
– Optional (upcharge applicable): metallic silver, bronze, metallic charcoal, aluminum, semi-gloss black, sand.
– Custom colors available upon request.Finish
– Standard: epoxy/polyester powder paint.
– May be repainted with any interior paint.Voltage
– 120V, 208V, 240/208V, 277V, 347V, 480V, 600V, 1-phase.Construction
– Robust 22-gauge steel body.
– Sturdy 20-gauge steel front panel.
– Welded 20-gauge steel connection box.
– Rounded corners.
– Linear high-limit temperature control with automatic reset.Heating element
– Stainless steel tubular heating element with aluminum fins.
– Floating heating element on high-temperature nylon bushings reducing expansion noises.Watt density
– Average standard watt density of 275W/ft. (900W/m).
– Average low watt density of 200W/ft. (659W/m).Control
– A wide selection of built-in controls available.
– Built-in thermostat kit can be installed at either end.
– Built-in relay kit fits in the right end box only.
– A compartment for low voltage connections (located directly under the junction box) facilitates the installation of low voltage relay in electric baseboard.Global Commander highly recommends using an electronic wall thermostat
for greater comfort and efficiency.Installation
– Installation directly on the floor.
– No need to disassemble for electrical connection or wall attachment.
– Built-in single-screw wire holder on the back for quick connection box access from either end.
– Two rows of oval mounting holes with centering mark for ease of installation.
– Raceway and side knock-outs for baseboard interconnection.Warranty
– 5-year warranty against defects.
– Heating element has a lifetime warranty for the initial end user.Application
– Kitchen, living room, family room, bedroom, bay window, commercial building, office building, condo, restaurant.
