Showing all 26 results
-
Baseboard Heater PEG0300
Read moreFeatures
Color
– Standard: white, almond.
– Optional (upcharge applicable): metallic silver, bronze, metallic charcoal, aluminum, semi-gloss black, sand.
– Custom colors available upon request.Finish
– Standard: epoxy/polyester powder paint.
– May be repainted with any interior paint.Voltage
– 120V, 208V, 240/208V, 277V, 347V, 480V, 600V, 1-phase.Construction
– Robust 22-gauge steel body.
– Sturdy 20-gauge steel front panel.
– Welded 20-gauge steel connection box.
– Rounded corners.
– Linear high-limit temperature control with automatic reset.Heating element
– Stainless steel tubular heating element with aluminum fins.
– Floating heating element on high-temperature nylon bushings reducing expansion noises.Watt density
– Average standard watt density of 275W/ft. (900W/m).
– Average low watt density of 200W/ft. (659W/m).Control
– A wide selection of built-in controls available.
– Built-in thermostat kit can be installed at either end.
– Built-in relay kit fits in the right end box only.
– A compartment for low voltage connections (located directly under the junction box) facilitates the installation of low voltage relay in electric baseboard.Global Commander highly recommends using an electronic wall thermostat
for greater comfort and efficiency.Installation
– Installation directly on the floor.
– No need to disassemble for electrical connection or wall attachment.
– Built-in single-screw wire holder on the back for quick connection box access from either end.
– Two rows of oval mounting holes with centering mark for ease of installation.
– Raceway and side knock-outs for baseboard interconnection.Warranty
– 5-year warranty against defects.
– Heating element has a lifetime warranty for the initial end user.Application
– Kitchen, living room, family room, bedroom, bay window, commercial building, office building, condo, restaurant. -
Baseboard Heater PEG0302
Read moreFeatures
Color
– Standard: white, almond.
– Optional (upcharge applicable): metallic silver, bronze, metallic charcoal, aluminum, semi-gloss black, sand.
– Custom colors available upon request.Finish
– Standard: epoxy/polyester powder paint.
– May be repainted with any interior paint.Voltage
– 120V, 208V, 240/208V, 277V, 347V, 480V, 600V, 1-phase.Construction
– Robust 22-gauge steel body.
– Sturdy 20-gauge steel front panel.
– Welded 20-gauge steel connection box.
– Rounded corners.
– Linear high-limit temperature control with automatic reset.Heating element
– Stainless steel tubular heating element with aluminum fins.
– Floating heating element on high-temperature nylon bushings reducing expansion noises.Watt density
– Average standard watt density of 275W/ft. (900W/m).
– Average low watt density of 200W/ft. (659W/m).Control
– A wide selection of built-in controls available.
– Built-in thermostat kit can be installed at either end.
– Built-in relay kit fits in the right end box only.
– A compartment for low voltage connections (located directly under the junction box) facilitates the installation of low voltage relay in electric baseboard.Global Commander highly recommends using an electronic wall thermostat
for greater comfort and efficiency.Installation
– Installation directly on the floor.
– No need to disassemble for electrical connection or wall attachment.
– Built-in single-screw wire holder on the back for quick connection box access from either end.
– Two rows of oval mounting holes with centering mark for ease of installation.
– Raceway and side knock-outs for baseboard interconnection.Warranty
– 5-year warranty against defects.
– Heating element has a lifetime warranty for the initial end user.Application
– Kitchen, living room, family room, bedroom, bay window, commercial building, office building, condo, restaurant. -
Baseboard Heater PEG0500
Read moreFeatures
Color
– Standard: white, almond.
– Optional (upcharge applicable): metallic silver, bronze, metallic charcoal, aluminum, semi-gloss black, sand.
– Custom colors available upon request.Finish
– Standard: epoxy/polyester powder paint.
– May be repainted with any interior paint.Voltage
– 120V, 208V, 240/208V, 277V, 347V, 480V, 600V, 1-phase.Construction
– Robust 22-gauge steel body.
– Sturdy 20-gauge steel front panel.
– Welded 20-gauge steel connection box.
– Rounded corners.
– Linear high-limit temperature control with automatic reset.Heating element
– Stainless steel tubular heating element with aluminum fins.
– Floating heating element on high-temperature nylon bushings reducing expansion noises.Watt density
– Average standard watt density of 275W/ft. (900W/m).
– Average low watt density of 200W/ft. (659W/m).Control
– A wide selection of built-in controls available.
– Built-in thermostat kit can be installed at either end.
– Built-in relay kit fits in the right end box only.
– A compartment for low voltage connections (located directly under the junction box) facilitates the installation of low voltage relay in electric baseboard.Global Commander highly recommends using an electronic wall thermostat
for greater comfort and efficiency.Installation
– Installation directly on the floor.
– No need to disassemble for electrical connection or wall attachment.
– Built-in single-screw wire holder on the back for quick connection box access from either end.
– Two rows of oval mounting holes with centering mark for ease of installation.
– Raceway and side knock-outs for baseboard interconnection.Warranty
– 5-year warranty against defects.
– Heating element has a lifetime warranty for the initial end user.Application
– Kitchen, living room, family room, bedroom, bay window, commercial building, office building, condo, restaurant. -
Baseboard Heater PEG0502
Read moreFeatures
Color
– Standard: white, almond.
– Optional (upcharge applicable): metallic silver, bronze, metallic charcoal, aluminum, semi-gloss black, sand.
– Custom colors available upon request.Finish
– Standard: epoxy/polyester powder paint.
– May be repainted with any interior paint.Voltage
– 120V, 208V, 240/208V, 277V, 347V, 480V, 600V, 1-phase.Construction
– Robust 22-gauge steel body.
– Sturdy 20-gauge steel front panel.
– Welded 20-gauge steel connection box.
– Rounded corners.
– Linear high-limit temperature control with automatic reset.Heating element
– Stainless steel tubular heating element with aluminum fins.
– Floating heating element on high-temperature nylon bushings reducing expansion noises.Watt density
– Average standard watt density of 275W/ft. (900W/m).
– Average low watt density of 200W/ft. (659W/m).Control
– A wide selection of built-in controls available.
– Built-in thermostat kit can be installed at either end.
– Built-in relay kit fits in the right end box only.
– A compartment for low voltage connections (located directly under the junction box) facilitates the installation of low voltage relay in electric baseboard.Global Commander highly recommends using an electronic wall thermostat
for greater comfort and efficiency.Installation
– Installation directly on the floor.
– No need to disassemble for electrical connection or wall attachment.
– Built-in single-screw wire holder on the back for quick connection box access from either end.
– Two rows of oval mounting holes with centering mark for ease of installation.
– Raceway and side knock-outs for baseboard interconnection.Warranty
– 5-year warranty against defects.
– Heating element has a lifetime warranty for the initial end user.Application
– Kitchen, living room, family room, bedroom, bay window, commercial building, office building, condo, restaurant. -
Baseboard Heater PEG0507
Read moreFeatures
Color
– Standard: white, almond.
– Optional (upcharge applicable): metallic silver, bronze, metallic charcoal, aluminum, semi-gloss black, sand.
– Custom colors available upon request.Finish
– Standard: epoxy/polyester powder paint.
– May be repainted with any interior paint.Voltage
– 120V, 208V, 240/208V, 277V, 347V, 480V, 600V, 1-phase.Construction
– Robust 22-gauge steel body.
– Sturdy 20-gauge steel front panel.
– Welded 20-gauge steel connection box.
– Rounded corners.
– Linear high-limit temperature control with automatic reset.Heating element
– Stainless steel tubular heating element with aluminum fins.
– Floating heating element on high-temperature nylon bushings reducing expansion noises.Watt density
– Average standard watt density of 275W/ft. (900W/m).
– Average low watt density of 200W/ft. (659W/m).Control
– A wide selection of built-in controls available.
– Built-in thermostat kit can be installed at either end.
– Built-in relay kit fits in the right end box only.
– A compartment for low voltage connections (located directly under the junction box) facilitates the installation of low voltage relay in electric baseboard.Global Commander highly recommends using an electronic wall thermostat
for greater comfort and efficiency.Installation
– Installation directly on the floor.
– No need to disassemble for electrical connection or wall attachment.
– Built-in single-screw wire holder on the back for quick connection box access from either end.
– Two rows of oval mounting holes with centering mark for ease of installation.
– Raceway and side knock-outs for baseboard interconnection.Warranty
– 5-year warranty against defects.
– Heating element has a lifetime warranty for the initial end user.Application
– Kitchen, living room, family room, bedroom, bay window, commercial building, office building, condo, restaurant. -
Baseboard Heater PEG0750
Read moreFeatures
Color
– Standard: white, almond.
– Optional (upcharge applicable): metallic silver, bronze, metallic charcoal, aluminum, semi-gloss black, sand.
– Custom colors available upon request.Finish
– Standard: epoxy/polyester powder paint.
– May be repainted with any interior paint.Voltage
– 120V, 208V, 240/208V, 277V, 347V, 480V, 600V, 1-phase.Construction
– Robust 22-gauge steel body.
– Sturdy 20-gauge steel front panel.
– Welded 20-gauge steel connection box.
– Rounded corners.
– Linear high-limit temperature control with automatic reset.Heating element
– Stainless steel tubular heating element with aluminum fins.
– Floating heating element on high-temperature nylon bushings reducing expansion noises.Watt density
– Average standard watt density of 275W/ft. (900W/m).
– Average low watt density of 200W/ft. (659W/m).Control
– A wide selection of built-in controls available.
– Built-in thermostat kit can be installed at either end.
– Built-in relay kit fits in the right end box only.
– A compartment for low voltage connections (located directly under the junction box) facilitates the installation of low voltage relay in electric baseboard.Global Commander highly recommends using an electronic wall thermostat
for greater comfort and efficiency.Installation
– Installation directly on the floor.
– No need to disassemble for electrical connection or wall attachment.
– Built-in single-screw wire holder on the back for quick connection box access from either end.
– Two rows of oval mounting holes with centering mark for ease of installation.
– Raceway and side knock-outs for baseboard interconnection.Warranty
– 5-year warranty against defects.
– Heating element has a lifetime warranty for the initial end user.Application
– Kitchen, living room, family room, bedroom, bay window, commercial building, office building, condo, restaurant. -
Baseboard Heater PEG0752
Read moreFeatures
Color
– Standard: white, almond.
– Optional (upcharge applicable): metallic silver, bronze, metallic charcoal, aluminum, semi-gloss black, sand.
– Custom colors available upon request.Finish
– Standard: epoxy/polyester powder paint.
– May be repainted with any interior paint.Voltage
– 120V, 208V, 240/208V, 277V, 347V, 480V, 600V, 1-phase.Construction
– Robust 22-gauge steel body.
– Sturdy 20-gauge steel front panel.
– Welded 20-gauge steel connection box.
– Rounded corners.
– Linear high-limit temperature control with automatic reset.Heating element
– Stainless steel tubular heating element with aluminum fins.
– Floating heating element on high-temperature nylon bushings reducing expansion noises.Watt density
– Average standard watt density of 275W/ft. (900W/m).
– Average low watt density of 200W/ft. (659W/m).Control
– A wide selection of built-in controls available.
– Built-in thermostat kit can be installed at either end.
– Built-in relay kit fits in the right end box only.
– A compartment for low voltage connections (located directly under the junction box) facilitates the installation of low voltage relay in electric baseboard.Global Commander highly recommends using an electronic wall thermostat
for greater comfort and efficiency.Installation
– Installation directly on the floor.
– No need to disassemble for electrical connection or wall attachment.
– Built-in single-screw wire holder on the back for quick connection box access from either end.
– Two rows of oval mounting holes with centering mark for ease of installation.
– Raceway and side knock-outs for baseboard interconnection.Warranty
– 5-year warranty against defects.
– Heating element has a lifetime warranty for the initial end user.Application
– Kitchen, living room, family room, bedroom, bay window, commercial building, office building, condo, restaurant. -
Baseboard Heater PEG0757
Read moreFeatures
Color
– Standard: white, almond.
– Optional (upcharge applicable): metallic silver, bronze, metallic charcoal, aluminum, semi-gloss black, sand.
– Custom colors available upon request.Finish
– Standard: epoxy/polyester powder paint.
– May be repainted with any interior paint.Voltage
– 120V, 208V, 240/208V, 277V, 347V, 480V, 600V, 1-phase.Construction
– Robust 22-gauge steel body.
– Sturdy 20-gauge steel front panel.
– Welded 20-gauge steel connection box.
– Rounded corners.
– Linear high-limit temperature control with automatic reset.Heating element
– Stainless steel tubular heating element with aluminum fins.
– Floating heating element on high-temperature nylon bushings reducing expansion noises.Watt density
– Average standard watt density of 275W/ft. (900W/m).
– Average low watt density of 200W/ft. (659W/m).Control
– A wide selection of built-in controls available.
– Built-in thermostat kit can be installed at either end.
– Built-in relay kit fits in the right end box only.
– A compartment for low voltage connections (located directly under the junction box) facilitates the installation of low voltage relay in electric baseboard.Global Commander highly recommends using an electronic wall thermostat
for greater comfort and efficiency.Installation
– Installation directly on the floor.
– No need to disassemble for electrical connection or wall attachment.
– Built-in single-screw wire holder on the back for quick connection box access from either end.
– Two rows of oval mounting holes with centering mark for ease of installation.
– Raceway and side knock-outs for baseboard interconnection.Warranty
– 5-year warranty against defects.
– Heating element has a lifetime warranty for the initial end user.Application
– Kitchen, living room, family room, bedroom, bay window, commercial building, office building, condo, restaurant. -
Baseboard Heater PEG1000
Read moreFeatures
Color
– Standard: white, almond.
– Optional (upcharge applicable): metallic silver, bronze, metallic charcoal, aluminum, semi-gloss black, sand.
– Custom colors available upon request.Finish
– Standard: epoxy/polyester powder paint.
– May be repainted with any interior paint.Voltage
– 120V, 208V, 240/208V, 277V, 347V, 480V, 600V, 1-phase.Construction
– Robust 22-gauge steel body.
– Sturdy 20-gauge steel front panel.
– Welded 20-gauge steel connection box.
– Rounded corners.
– Linear high-limit temperature control with automatic reset.Heating element
– Stainless steel tubular heating element with aluminum fins.
– Floating heating element on high-temperature nylon bushings reducing expansion noises.Watt density
– Average standard watt density of 275W/ft. (900W/m).
– Average low watt density of 200W/ft. (659W/m).Control
– A wide selection of built-in controls available.
– Built-in thermostat kit can be installed at either end.
– Built-in relay kit fits in the right end box only.
– A compartment for low voltage connections (located directly under the junction box) facilitates the installation of low voltage relay in electric baseboard.Global Commander highly recommends using an electronic wall thermostat
for greater comfort and efficiency.Installation
– Installation directly on the floor.
– No need to disassemble for electrical connection or wall attachment.
– Built-in single-screw wire holder on the back for quick connection box access from either end.
– Two rows of oval mounting holes with centering mark for ease of installation.
– Raceway and side knock-outs for baseboard interconnection.Warranty
– 5-year warranty against defects.
– Heating element has a lifetime warranty for the initial end user.Application
– Kitchen, living room, family room, bedroom, bay window, commercial building, office building, condo, restaurant. -
Baseboard Heater PEG1002
Read moreFeatures
Color
– Standard: white, almond.
– Optional (upcharge applicable): metallic silver, bronze, metallic charcoal, aluminum, semi-gloss black, sand.
– Custom colors available upon request.Finish
– Standard: epoxy/polyester powder paint.
– May be repainted with any interior paint.Voltage
– 120V, 208V, 240/208V, 277V, 347V, 480V, 600V, 1-phase.Construction
– Robust 22-gauge steel body.
– Sturdy 20-gauge steel front panel.
– Welded 20-gauge steel connection box.
– Rounded corners.
– Linear high-limit temperature control with automatic reset.Heating element
– Stainless steel tubular heating element with aluminum fins.
– Floating heating element on high-temperature nylon bushings reducing expansion noises.Watt density
– Average standard watt density of 275W/ft. (900W/m).
– Average low watt density of 200W/ft. (659W/m).Control
– A wide selection of built-in controls available.
– Built-in thermostat kit can be installed at either end.
– Built-in relay kit fits in the right end box only.
– A compartment for low voltage connections (located directly under the junction box) facilitates the installation of low voltage relay in electric baseboard.Global Commander highly recommends using an electronic wall thermostat
for greater comfort and efficiency.Installation
– Installation directly on the floor.
– No need to disassemble for electrical connection or wall attachment.
– Built-in single-screw wire holder on the back for quick connection box access from either end.
– Two rows of oval mounting holes with centering mark for ease of installation.
– Raceway and side knock-outs for baseboard interconnection.Warranty
– 5-year warranty against defects.
– Heating element has a lifetime warranty for the initial end user.Application
– Kitchen, living room, family room, bedroom, bay window, commercial building, office building, condo, restaurant. -
Baseboard Heater PEG1007
Read moreFeatures
Color
– Standard: white, almond.
– Optional (upcharge applicable): metallic silver, bronze, metallic charcoal, aluminum, semi-gloss black, sand.
– Custom colors available upon request.Finish
– Standard: epoxy/polyester powder paint.
– May be repainted with any interior paint.Voltage
– 120V, 208V, 240/208V, 277V, 347V, 480V, 600V, 1-phase.Construction
– Robust 22-gauge steel body.
– Sturdy 20-gauge steel front panel.
– Welded 20-gauge steel connection box.
– Rounded corners.
– Linear high-limit temperature control with automatic reset.Heating element
– Stainless steel tubular heating element with aluminum fins.
– Floating heating element on high-temperature nylon bushings reducing expansion noises.Watt density
– Average standard watt density of 275W/ft. (900W/m).
– Average low watt density of 200W/ft. (659W/m).Control
– A wide selection of built-in controls available.
– Built-in thermostat kit can be installed at either end.
– Built-in relay kit fits in the right end box only.
– A compartment for low voltage connections (located directly under the junction box) facilitates the installation of low voltage relay in electric baseboard.Global Commander highly recommends using an electronic wall thermostat
for greater comfort and efficiency.Installation
– Installation directly on the floor.
– No need to disassemble for electrical connection or wall attachment.
– Built-in single-screw wire holder on the back for quick connection box access from either end.
– Two rows of oval mounting holes with centering mark for ease of installation.
– Raceway and side knock-outs for baseboard interconnection.Warranty
– 5-year warranty against defects.
– Heating element has a lifetime warranty for the initial end user.Application
– Kitchen, living room, family room, bedroom, bay window, commercial building, office building, condo, restaurant. -
Baseboard Heater PEG2007
Read moreFeatures
Color
– Standard: white, almond.
– Optional (upcharge applicable): metallic silver, bronze, metallic charcoal, aluminum, semi-gloss black, sand.
– Custom colors available upon request.Finish
– Standard: epoxy/polyester powder paint.
– May be repainted with any interior paint.Voltage
– 120V, 208V, 240/208V, 277V, 347V, 480V, 600V, 1-phase.Construction
– Robust 22-gauge steel body.
– Sturdy 20-gauge steel front panel.
– Welded 20-gauge steel connection box.
– Rounded corners.
– Linear high-limit temperature control with automatic reset.Heating element
– Stainless steel tubular heating element with aluminum fins.
– Floating heating element on high-temperature nylon bushings reducing expansion noises.Watt density
– Average standard watt density of 275W/ft. (900W/m).
– Average low watt density of 200W/ft. (659W/m).Control
– A wide selection of built-in controls available.
– Built-in thermostat kit can be installed at either end.
– Built-in relay kit fits in the right end box only.
– A compartment for low voltage connections (located directly under the junction box) facilitates the installation of low voltage relay in electric baseboard.Global Commander highly recommends using an electronic wall thermostat
for greater comfort and efficiency.Installation
– Installation directly on the floor.
– No need to disassemble for electrical connection or wall attachment.
– Built-in single-screw wire holder on the back for quick connection box access from either end.
– Two rows of oval mounting holes with centering mark for ease of installation.
– Raceway and side knock-outs for baseboard interconnection.Warranty
– 5-year warranty against defects.
– Heating element has a lifetime warranty for the initial end user.Application
– Kitchen, living room, family room, bedroom, bay window, commercial building, office building, condo, restaurant. -
Ceiling Fan Loose Wire, Forward and Reverse 20500 ft³/min 56 in White/Painted
Read moreManufacturer:CANARM
Manufacturer #:cp561118111r -
Fan Housing Pack Polymeric includes Metal Fan Housings and Duct Connector
Read moreManufacturer:VENMAR
Manufacturer #:ech600 dnr -
Filter Fan Unit Filter Fan Unit 32.4 ft³/min at 50 Hz, 38.8 ft³/min at 60 Hz RAL 7035 Gray
Read moreManufacturer:RITTAL
Manufacturer #:3238110 -
Nu-heat Programmable Thermostat 120/240 VAC, 15 A High Gloss White Frame
Read moreManufacturer:NVENT THERMAL
Manufacturer #:ac0056 -
STRIP CURTAINS FOR WALK-IN COOLERS AND FREEZERS
Read moreManufacturer:ENERGIZE ENERGY
Manufacturer #:402la6063884 -
WhisperCeiling® DC™ Ventilation Fan, 50 – 80 – 110 CFM
Read moreFV-0511VQ1
WhisperCeiling® DC™ fan with built-in Pick-A-Flow™ speed selector switch allows you to select your required airflow (50-80-110 CFM). Features a DC Motor with SmartFlow® technology and a Flex-Z fast installation bracket and can be used to comply with the latest codes and standards.
KEY FEATURES
- Precision Spot Ventilation Fan
-
WhisperCeiling® DC™ Ventilation Fan/Light, 50-80-110 CFM
Read moreFV-0511VQL1
WhisperCeiling® DC™ fan/light with built-in Pick-A-Flow™ speed selector switch allows you to select your required airflow (50-80-110 CFM). Features a DC Motor with SmartFlow® technology and a Flex-Z fast installation bracket and can be used to comply with the latest codes and standards.
KEY FEATURES
- Precision Spot Ventilation Fan
-
WhisperSense® DC™ Precision Spot Ventilation Fan with Exclusive Smart Sensing Technology
Read moreFV-0511VQC1
WhisperSense® DC™ Precision Spot Ventilation fan with built-in Dual Sensor Technology (Motion & Moisture) for automatic moisture and odor control. Features Pick-A-Flow™ speed selector switch to select required airflow (50-80-110 CFM) and ECM Motor with SmartFlow® technology for optimum performance and can be used to comply with the latest codes and standards.
-
WhisperValue® DC™ – Ideal Single / Multi-Family Solution, 50, 80 or 100 CFM
Read moreFV-0510VS1
Incorporates our Pick-A-Flow™ speed selector allowing you to customize airflow (50, 80 or 100 CFM)
KEY FEATURES
- Revolutionary DC motor with SmartFlow™ Technology
- Features a super slim 3-3/8″ Housing Depth
- Unique L-shaped bracket for easy installation
- 4″ oval duct allows the fan to easily fit into 2 x 4 construction while allowing a high CFM to be maintained
